Äänichipsi SIS SI7012 ja Hauppauge WinTv HVR1100 eivät toimi yhdessä

Käyttis Slackware 12.2

Ongelma:
Mic ei toimi, joten en voi käyttää skype:ä

Tuleva ääni toimii hyvin. Mic asetettu alsamixer:llä
Käytetty alsactl store

Ilmeisesti Happauge WinTv HVR1100 kortti toimii 
häirikkönä, kun haluaa käyttää skype:ä

Ote dmesg:stä

cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
intel8x0_measure_ac97_clock: measured 64981 usecs
intel8x0: clocking to 48000
cx8800 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
cx88[0]: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40,autodetected]
cx88[0]: TV tuner type 63, Radio tuner type -1
cx2388x alsa driver version 0.0.6 loaded
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
tuner’ 1-0043: chip found @ 0x86 (cx88[0])
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
tda9887 1-0043: creating new instance
tda9887 1-0043: tda988[5/6/7] found
tuner’ 1-0061: chip found @ 0xc2 (cx88[0])
tuner’ 1-0063: chip found @ 0xc6 (cx88[0])
tveeprom 1-0050: Hauppauge model 94009, rev C2A0, serial# 291453
tveeprom 1-0050: MAC address is 00-0D-FE-04-72-7D
tveeprom 1-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L’) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
tveeprom 1-0050: audio processor is CX882 (idx 33)
tveeprom 1-0050: decoder processor is CX882 (idx 25)
tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
cx88[0]: hauppauge eeprom: model=94009
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
tuner-simple 1-0061: creating new instance
tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
input: cx88 IR (Hauppauge WinTV-HVR110 as /devices/pci0000:00/0000:00:0a.0/input/input5
cx88[0]/0: found at 0000:00:0a.0, rev: 5, irq: 18, latency: 32, mmio: 0xcb000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
cx88[0]/2: cx2388x 8802 Driver Manager
cx88-mpeg driver manager 0000:00:0a.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
cx88[0]/2: found at 0000:00:0a.2, rev: 5, irq: 18, latency: 32, mmio: 0xcd000000
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
cx88_audio 0000:00:0a.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
i2c_algo_bit: module is already loaded
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40]
cx88[0]/2: cx2388x based DVB/ATSC card
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
tuner-simple 1-0061: attaching existing instance
tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
DVB: registering new adapter (cx88[0])
DVB: registering frontend 0 (Conexant CX22702 DVB-T)…

Hauppauge WinTV HVR1100 toimii hyvin TV katselussa.
Slackware 12.2 käyttis ja Kaffeine hakkaa tältä osin muut distrot
joita olen kokeillut.

Emolevyllä SIS SI7012 äänichipsi

Miten eliminoida Hauppauge siksi ajaksi kun käyttää skypeä?

Erik